Konica Minolta Bizhub C20P User Manual page 80

All factory default values are shown in bold.
PAPER
SOURCE
LAYOUT
PAPER
MARGIN
IMAGE
QUAL-
ITY
66
Settings
TRAY1/TRAY2/TRAY3
Select the tray that is used for camera direct printing.
appears only if the optional lower feeder unit is
TRAY3
installed.
Settings
1-UP/2-UP/3-UP/4-UP/6-UP/8-UP
Specify the number of images printed on a single sheet of media.
When set to
1-UP
sheet of media.
Settings
STANDARD/MINIMUM
Select the size of the media margins (area that is not printed in).
If is selected, the standard media margin size is
STANDARD
specified.
If is selected, the media margins are reduced.
MINIMUM
Settings
BRIGHT-
NESS
The brightness of the printed image can be
adjusted.
Settings
CONTRAST
The contrast of the image can be adjusted.
Settings
ECONOMY
PRINT
Select whether to print graphics with a reduced
density by reducing the amount of toner that is used.
If
ON
reduced when printing.
If
OFF
reduced when printing.
, only one image will be printed on a single
-15%/-10%/-5%/0%/+5%/+10%/
+15%
-15%/-10%/-5%/0%/+5%/+10%/
+15%
ON/OFF
is selected, the amount of toner used is
is selected, the amount of toner used is not
Configuration Menu Overview