Konica Minolta Bizhub C20P User Manual page 98

AUTO
CON-
TINUE
HOLD
JOB
TIME
OUT
ENERGY
SAVER
ENERGY
SAVER
TIME
MENU
TIME
OUT
84
Settings
ON/OFF
Select whether or not printing continues if the size or type of
media in the selected tray is different from the size or type of
media for the print job.
If
AUTO CONTINUE
ues after about 10 seconds under the following conditions. At
this time, printing will be performed even if the media size is dif-
ferent.
No media: PAPER EMPTY (Page 211)/TRAY EMPTY (Page
213)
Different media size/type: PAPER ERROR (Page 211)/TRAY x
PAPER ERR (Page 213)
Settings
DISABLE/1 hour/4 hours/1 day/
1 week
Specify the length of time until print jobs saved on the hard disk
are deleted. If
DISABLE
at a specific time.
Settings
ON/OFF
If is selected, the machine enters Energy Saver mode
ON
according to the length of time specified for
.
TIME
If is selected, the machine will not enter Energy Saver
OFF
mode.
Settings
5 minutes/6 minutes/7 minutes/8
minutes/9 minutes/10 minutes/11
minutes/12 minutes/13 minutes/14
minutes/15 minutes/30 minutes/
1 hour/3 hours
Specify the length of time until the machine enters Energy
Saver mode.
This menu item appears only when
.
ON
Settings
OFF/1 minute/2 minutes
Specify the length of time until the status screen is displayed
when no operation is performed while a menu or help screen is
displayed in the message window. If
timeout occurs.
is set to , printing automatically contin-
ON
is selected, print jobs are not deleted
ENERGY SAVER
OFF
Configuration Menu Overview
ENERGY SAVER
is set to
is selected, no