Configure The "Envelope Application" In The By-Pass; Quick Copy User Interface - Konica Minolta bizhub 360 Function Manual

Configure the "Envelope Application" in the By-Pass

APPLICATION:
In order to feed envelops from the by-pass; the paper feed must be configured. Once
the by-pass is configured to accept envelops; the envelops are placed in the by-pass flap
up and short end inserted into by-pass. A maximum of no more then 10 envelopes can
be placed into the by-pass feed system at any one time.
To print addressed onto an envelop; utilize either a MailMerge type software or an address
master sheet.
1. Touch Paper , By-pass
2. Touch Change Tray Settings , Envelope , Custom size
3. Touch Y icon (input y in inches)
4. Touch X icon (input y in inches)

Quick Copy User Interface

APPLICATION:
The LCD control panel menu can be changed to offer the end-user additional copier-centric
feature selections; instead of utilizing the sub menus. Thus, The MFP copier can be selected
more efficiently.
1. Touch Utility/Counter
2. Touch User setting
3. Touch Display setting
4. Touch Copier basic screen setting
5. Touch Type 2
6. Touch OK.
The LCD control menu is now changed. There are now additional copier-centric
features available on the main menu; without having to use the sub menus to gain
access to these features.
bizhub 500 / 420 / 360
icon.
, Store
, Store , OK
Copy Job Shops
11