bizhub 500 / 420 / 360
To Access the MFP
1. Touch
2. Enter the password ("x")
3. Touch
4. Touch the
Built-in Stamp and Set Numbering Stamp Size
APPLICATION:
The stamp size of built-in stamps and Set Numbering can now be change. This enhances
the versatility of the existing functionality of built-in stamp and Set Numbering.
In this exercise; 1st produce an output sample of the standard Built-in Stamp and
Set Numbering Stamp size. Then utilize the following procedure for changing the size
of the Built-in Stamp and Set Numbering Stamp and compare the out put with
the standard functionality.
1. Touch
2. Touch
3. Touch
4. Touch
5. Touch
6. Touch
Copy
Job Shops
Input
OK
Access
hard key
Application
Stamp/Overlay
Built-in-Stamp
Change Size , OK
Set Numbering
Change Size , OK , Start
8