Finding The Copier Ip Address On The Bizhub 500/420/360; Create An 8.5" X 14" Set; Create An 8.5"X 11"-1:2 Set - Konica Minolta bizhub 360 Function Manual

Finding the Copier IP Address on the bizhub 500/420/360

It will be necessary to have access to the copier IP address when either configuring
the 500/420/360 onto a network or setting up a "one touch".
1. Press Utility/Counter on control panel.
2. Administrator Setting
3. Enter administrator password: 12345678
4. Network Setting
5. TCP/IP setting
The copier IP address will appear on the control panel display.

Create an 8.5" x 14" Set

Stapled on left hand corner
Place two 8.5" x 14" originals face up; feet 1st into the RADF
1. Finishing
2. Corner OK
,
3. Combine Originals & Original Direction
4. Index the last original graphic on right side of display panel
5. Press start key
Create an 8.5"x 11"–1:2 Set
Stapled on left corner & reduced by 78.5%
Place eight 8.5" x 11", 1:1 originals face up in the RADF.
1. Simplex/Duplex
2. 1:2 OK
,
3. Finishing
4. Corner OK
,
5. Zoom Reduce/0.785
,
6. Press start key
bizhub 500 / 420 / 360
OK
,
OK
,
Copy
OK
,
1
Job Shops