Table of Contents
Advertisement
Programming printouts
To program a programmable one-touch key to print a list:
1
Press Program key,
, 3, 0, 1,
A
grammable one-touch number available:
Select Program No.
P2:No Number Stored
Note: If P2 appears on the
LCD
number for P1. You can see what you programmed into P1 by press-
ing , if you want. For example, if you set P1 for printing a list of the
machine settings, you will see:
Select Program No.
P1:Machine Settings
Press
to go back to the programmable one-touch key you want to
enter.
Note: To erase a programmable one-touch key, see page 3.48.
2
Press the key that you want to program or change. Here, we've selected P2.
Select Program No.
P2:No Number Stored
Note: If your previous command for this key was for printing a list and you
want to keep this key programmed for printing a list, use these
instructions to make changes. But if you want to assign this key to a
completely different operation (for a delayed transmission, for exam-
ple), then you first must erase the stored command before
programming the new one.
3
If you want to select a different programmable one-touch key than the one
that appears on the
, press that key now.
LCD
4
Press
. The
asks which operation you want to program into the pro-
ENTER
LCD
grammable one-touch:
Type :Communication
/ /Enter
Note: If changing a previously stored command, skip to step 7.
5
Press
until "List Print" appears.
Type :List Print
/ /Enter
. The
shows the first empty pro-
ENTER
LCD
, it means that you have already entered a
6
Press
. The
asks which list you want to program into the program-
ENTER
LCD
mable one-touch:
P2:Machine Settings
/ /Enter
7
Press
until the list you want appears.
8
Press
.
ENTER
9
Press
to return your machine to standby mode.
STOP
Advanced features
3.45
Advertisement
Chapters
Table of Contents
