Using Alternative Telephone Network Service Providers - Konica Minolta 7013 Operating Instructions Manual

Using alternative telephone network service providers

Your fax machine is fitted with a Soft Key on the control panel to allow easy access
to other telephone networks such as Cable Telecom, Sprint or AT&T.
For this feature to work, either Dial Prefix or Dialing Options should be assigned to
Soft Keys. (Refer to page 3.1 and 3.16.)
The following information describes how to program the access number for the
Cable Telecom. For other networks you will have to program the appropriate access
number in place of the Cable Telecom access number. You can enter numbers up to
40 digits.
1
Press Program key, , 2, 1, 5,
B
Dial Prefix No
_
2
Enter the Telephone network access number on the numeric keypad. In this
example, we've entered 131 (Mercury
(Cable Telecom), skip to step 5.
Note: If you wish to access the Telephone network from a
access code followed by a dialling pause (the dialling pause is only
necessary on pulse dial
i.e., 9-/131-/ , or 9-/132 if a pause is required.
PIN
Dial Prefix No
131_
3
Press / on the control panel to enter a " -/ " in the
REDIAL PAUSE
instructs your fax machine to wait for a secondary dial tone before dialling
the number.
PIN
Dial Prefix No
131 -/ _
4
Now enter your number (10 digits).
PIN
Dial Prefix No
131 -/ 1234567890_
Note: If you wish to erase your
grammed numbers before proceeding to step 5.
5
Press to save the setting.
ENTER
.
ENTER
code service). If you entered 132
PIN
, enter the
PBX
's) before you enter the 131 or 132.
PBX
. This
LCD
number, press to erase all pro-
PIN CANCEL
Sending faxes with Dial prefix feature
Note: If you use the
MONITOR
key. You must assign Dial Prefix to one Soft Key in advance and use it.
To dial using the numeric keypad
1
Set the documents.
2
Press the Soft Key assigned
then the will show a "!" symbol to indicate the access to the alternative
LCD
telephone network.
Press Start
3
Dial a cost centre code (2 or 3 digits) if you selected this option when ordering
Cable Telecom service. Enter the fax number using the numeric keypad.
4
Press .
START
Notes:
PSTN
• You must enter the full National Code telephone number when dialling tele-
phone numbers via any network.
• You can not enter the Soft Key followed by the one-touch or speed-dial key (see
below for more information).
To dial using the one-touch or speed-dial keys
In order to send faxes using the one-touch or speed-dial keys, you must instruct
your fax machine to access the alternative telephone network when you store the
fax number into your autodialler.
To enter the access number into your autodialler:
Before entering a fax number, press the Soft Key assigned
enter the fax number.
To send faxes using the autodialler:
Set the document and press the one-touch key or enter the speed-dial number, as
usual.
/ key to dial, you cannot use
CALL DIALING OPTIONS
once or
DIAL PREFIX DIALING OPTIONS
DIAL PREFIX
Advanced features
three times,
. And then,
3.23