Konica Minolta 7013 Operating Instructions Manual page 86

• List of stored batch documents (page 3.12)
• Macros list (page 3.19)
Document storage:
• Regular polling documents (page 3.14)
• F-Code polling documents (page 3.28)
Programming a delayed transmission
To program a delayed transmission into a programmable one-touch key:
1
Press Program key, , 3, 0, 1,
A
grammable one-touch number available:
Select Program No.
P2:No Number Stored
Note: If P2 appears on the
LCD
number for P1. You can see what you programmed into P1 by press-
ing , if you want. For example, if you set P1 for storing of the polling
document, you will see:
Select Program No.
P1:Polling Document
Press to go back to the programmable one-touch key you want to
enter.
Note: To erase a programmable one-touch key, see page 3.48.
2
Press the key that you want to program or change. Here, we've selected P2.
Select Program No.
P2:No Number Stored
Note: If you're changing a previously stored command: If your previous com-
mand for this key was a for a delayed operation, and you want to keep
this key programmed for a delayed operation, use these instructions
to make changes. But if you want to assign this key to a completely
different operation for batch transmission, then you must first erase
the stored command before programming the new one.
3
If you want to select a different programmable one-touch key than what
appears on the , press that key now.
LCD
. The shows the first empty pro-
ENTER LCD
, it means that you have already entered a
4
Press . The asks which operation you want to program into the pro-
ENTER LCD
grammable one-touch:
Type :Communication
/ /Enter
Note: If changing a previously stored command, skip to step 7.
5
Press until "Communication" appears.
Type :Communication
/ /Enter
6
Press . The now shows either:
ENTER LCD
P2:Fax#/Advan.Func.
_
7
Use the numeric keypad to enter the number exactly as your machine should
dial it, including whatever codes your phone system requires. The number can
be up to 40 characters in length:
P2:Fax#/Advan.Func.
9-5550629_
Your display can show only 20 characters at a time. To view characters beyond
those 20, press to scroll to the left or
Important: Do not press
ENTER
8
Now, while you can still see the fax number on the
, . The
ADVANCED FUNCTIONS ENTER
Delayed
Enter Time: 11/20:30
9
Next, tell your fax to carry out this delayed command one of these ways:
Option 1: Perform the command once at a certain time on a certain day of
the month. (For example, "Do this at 5:05
To select this option, use the numeric keypad to enter the date
and time when the fax should perform the command:
Delayed
Enter Time: 30/17:05
Advanced features
P2:Fax#/Advan.Func.
or
9-5558743_
to scroll to the right.
.
, press
LCD
shows:
LCD
on the 30th.")
PM
3.35