Table of Contents
Advertisement
I Quick set mode
D D Entering quick set mode
q Push [F] then [MODE
• Select voice or e-mail operation mode in advance.
w Rotate [GRP] to select the desired item.
e Rotate [CH] to set the values or conditions for the
selected item.
r Push any key to exit quick set mode.
D D Quick set mode items
Noise blanker level
This item adjusts the noise blanker level to protect a
signal from various pulse-type noises from 1 to 10.
The set level is effective when the noise blanker is ac-
tivated.
Squelch level
This item adjusts the squelch threshold level from 1
to 100.
When the squelch is activated, signals stronger than
this set level only are received.
Dimmer
This item sets the LCD backlight brightness for dim-
mer selection from 0 (dark) to 10 (bright).
By pushing [F] then [0
DIM
lected to provide easy visibility during night time op-
eration, etc.
LCD contrast
This item sets the LCD contrast from 1 to 10.
] to enter quick set mode.
SET
(default: 5)
(default: 30)
], the set brightness is se-
(default: 6)
(default: 7)
12
SET MODE
[F]
[MODE
]
SET
[GRP]
[CH]
I T E M
S E L
I T E M
S E L
I T E M
S E L
I T E M
S E L
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
47
Advertisement
Table of Contents
