Table of Contents
Advertisement
Up to 8-character channel names can be assigned for
each user and ITU channel. This may be helpful for in-
dicating the frequency usage, ship name, etc.
D Programming
q Select the desired channel to be programmed.
w Push [FREQ/CH] to select channel indication
mode, if desired.
e Push [F] then [FREQ/CH].
• The 1st character for the channel names blinks.
R X
J 3 E
0 1 2 3 4 A
r Rotate [CH] selector to select the character for
channel names.
• See the table below for available characters.
• Available characters
KEY
CHARACTERS
CHANNEL NAME PROGRAMMING
D U P
C H - - - G P S - - -
L a t 4 5 5 9 ' N
L o n 1 3 4 4 4 ' E
1 6 : 2 3
(space)
NOTE: The display type must be set to "CH-
NAME" to display/program the channel names in ini-
tial set mode. (p. 49).
t Push the keypad several times to enter that char-
acter.
R X
J 3 E
0 1 2 3 4 A
y Repeat steps r and t to enter the channel name.
u Push [ENT] for 1 sec. to program the channel
name.
R X
J 3 E
0 1 2 3 4 A
KEY
CHARACTERS
5
D U P
C H - - - G P S - - -
L a t 4 5 5 9 ' N
L o n 1 3 4 4 4 ' E
1 6 : 2 3
D U P
C H - - - G P S - - -
L a t 4 5 5 9 ' N
L o n 1 3 4 4 4 ' E
1 6 : 2 3
4
5
13
Advertisement
Table of Contents
