Channel Name Programming; Memory Transferring - Icom IC-V82 Instruction Manual

6
MEMORY/CALL OPERATION

■ Channel name programming

qSelect a "Channel Name Indication" type in
(p. 63).
MODE
wPush [C•
] to select memory
MR
mode, if necessary.
ePush [A•
], then push [8•
FUNC
to enter into the channel name
programming mode.
• The character to be edited blinks.
rRotate [VOL] to select a charac-
ter.
tPush [Y Y ] to move to the right, [Z Z ] to move to the left.
• Up to 5 characters can be used for channel name.
• Usable characters are A–Z, 0–9, "space," +, –, =, ✱, /, [, ] and :.
y Push [✱•
] (or [D•
ENT
name programming mode.
22
INITIAL SET
[VOL]
]
SET
FUNC
ENT
SET
]) to fix and exit the channel
CLR

■ Memory transferring

This function transfers a memory channel's contents to VFO
(or another memory/call channel). This is useful when search-
ing for signals around a memory channel frequency and for
recalling the offset frequency, subaudible tone frequency etc.
D Memory/call ➾ VFO
qSelect the memory (call) channel
C
to be transferred:
MR
➥ Push [C•
] or [B•
MR
A
lect memory (call) mode.
➥ Push [Y Y ] or [Z Z ] to select the
memory channel.
8
• When [VOL] is assigned as tuning
dial, rotate [VOL] to select the
memory channel. (pgs. 14, 63)
wPush [A•
], then push [C•
FUNC
for 1 sec. to transfer the selected
memory contents to the VFO.
• VFO mode is selected automatically.
] to se-
CALL
]
MR
C
MR
B
CALL
A
FUNC