H Vitosol 100 - Viessmann Vitosol
100 Technical Manual

Vitosol 100
Both versions are suitable for installation
on pitched and flat roofs.
The selection of method of installation,
either mounted on or integrated into the
roof are influenced by the structural
characteristics of the building. For
example, roof integration is
recommended for new building projects
(see information on design information
regarding roof integration).
Pitched roofs mounting on the roof
Design information regarding installation surfaces
Type s/w 2.5
Collector a mm b
Type s 2 385
Type w 1 138
VITOSOL
Viessmann offers universal fastening
systems to simplify installation. The
fastening systems are suitable for
virtually any form of roof and roof cover
as well as for installations on flat roofs.
The fixing systems are statically designed
for the snow load zone 3 to 800 m above
sea level.
Viessmann offers a special solar panel
support to prevent breakages on tiled
F
E
A Collector
mm
B Additional batten
1 900 2 100
C Roof tie
500 900
D Mounting rail
E Plastic tile (on site, 4 no. per collector)
F Solar panel support for roofs with
higher snow loads
2.4 Selection of collector types
roofs or for areas where snow loads
2
above 2.6 kN/m are expected.
For this application, obtain a plastic tile
manufactured by Klöber from your local
builders' merchant.
The parts required are illustrated on
page 37.
Installation kits are available for
supporting solar panels on flat roofs.
A
B
C
D
40
10
C
Note
The mounting rails are affixed directly to
the on−site substructure using clamping
bolts, if panels are installed without roof
ties, e.g. on tin roofs.
Vitosol 100
D
17