Viessmann Vitosol
100 Technical Manual page 18

2.4 Selection of collector types
Vitosol 100
Pitched roofs roof integration
Design information regarding installation surfaces
H We can recommend roof integration only
for roofs with roof tile cover and a
gradient of at least 25º, and with tile
cover, whose tiles have a dimension "c"
of at least 65 mm.
c
Discuss the installation with a roofing
contractor first, if flat tiles are used,
such as Tegalit or similar.
Collector type
Dimension mm
Vertical installation
Horizontal installation
*1
Add this value for every additional collector.
18
H On new buildings, leave the
corresponding area of normal roof
battens uncovered (see drawing).
s/w 2.5
a b
*1
3000 2160 + 1160
*1
1500 3410 + 2410
H Account for at least 3 rows of tiles on
the roof ridge to ensure adequate
ventilation below the roof.
5 DI
a b
2800 3300
VITOSOL