Accessories - Viessmann Vitosol
100 Technical Manual

3.4 Accessories

3 .4 Accessories
Threaded elbow
"
R1
160 (220)
290
40
For the installation of the cylinder
temperature sensor into the cylinder
return.
Casing for water connections
Connection pipe
24000
Corrugated pipe
outer
21.2
58
For connection between Solar−Divicon
and the DHW cylinder.
Stainless steel corrugated pipe with
thermal insulation.
58
Installation kit for connection pipe
comprising
H 2 threaded elbows (1 elbow with,
1 elbow without sensor well)
a
40
22
DHW cylinder
Vitocell−B 100
Vitocell−B 300
Vitocell 333
Vitocell 353
H 2 locking ring screw connections
H Gaskets and pipe clamps
Note
When using the assembly kit, the
threaded elbows for installing the
cylinder temperature sensor into the
return of the cylinder are not required.
Air separator
111
For installation in the flow pipe of the
solar circuit, preferably upstream of the
inlet to the DHW cylinder.
With automatic air vent valve, shut−off
valve and locking ring connection.
Quick−acting air vent valve (with tee)
65
For installation at the highest point of the
system.
With shut−off valve and locking ring
connection.
a
mm
190
242
Manual air vent valve (locking ring
242
connection with air vent valve)
242
62
For installation at the highest point of the
system.
With locking ring connection.
Connection pipe
1000
Stainless steel corrugated pipe with
thermal insulation and clamping ring
fitting.
VITOSOL