Port Forwarding Configuration Page; Defining Port Forwarding Rules - Hughes DiRECWAY DW7700 Supplemental User Manual

Port Forwarding
Configuration page
Defining port forwarding
Chapter 4 • DW7700 System Control Center
28
1036332-0001 Revision C
The Port Forwarding page shown in Figure 17 may be used to
define rules for allowing TCP and UDP traffic on the Internet to
access servers on your network.
Figure 17: Port Forwarding Configuration page
Follow these steps to use the Port Forwarding Configuration page
to define port forwarding rules:
rules
1. Open a web browser on a computer connected to the
DW7700.
You may also use a computer on the LAN if the DW7700 is
connected to an Ethernet device, such as a hub or router.
2. Type
www.systemcontrolcenter.com
location or address bar and press E
3. Click Port Forwarding Configuration
Control Center home page or in the left frame of the page you
are currently on.
4. Click Add Rule on the Port Forwarding Configuration page.
See Figure 17.
5. Enter the appropriate values in the following fields:
Server IP Address
Figure 18.
Figure 18: Entering port forwarding rules
.
NTER
on the System
, , and
Server port Global port
in the browser's
,
Rule ID
. See