Running A Transport Cleaning Sheet - Kodak Scan Station 520 EX Administrator's Manual

Running a transport
cleaning sheet
A-61628 December 2011
1. Remove the wrapping from the Transport Cleaning Sheet.
2. Adjust the side guides to fit the cleaning sheet.
3. Place a transport cleaning sheet in the input tray (adhesive side
facing you) in portrait orientation.
4. Select any destination (e.g., your email address) and press the Go
button.
5. After the transport cleaning sheet is scanned, turn it over (adhesive
side facing the input tray) and scan it again.
6. Open the Scan Station cover and wipe the imaging area with a lint-
free cloth.
7. Close the Scan Station cover with both hands.
8. Check your image quality.
9. If necessary, repeat this procedure until all residue is removed from
the rollers.
NOTE: When a transport cleaning sheet gets very dirty, discard it and
use a new one.
7-7