Uploading Configuration Settings; Loading Configuration Settings Using The Kss500 - Scanner Admin Application; Uploading The Configuration Settings Using A Usb Drive - Kodak Scan Station 520 EX Administrator's Manual

Uploading
configuration
settings
Loading configuration
settings using the
KSS500 - Scanner Admin
application
Uploading the
configuration settings
using a USB drive
3-46
After saving the administrative configuration file, the file needs to be
uploaded to the Scan Station. The configuration file can be uploaded by
using the KSS500 - Scanner Admin application or by saving the file to a
USB drive and inserting it in the USB port of the Scan Station.
1. From the KSS500 - Scanner Admin main screen, click on the Scan
Station(s) you want to upload the configuration file to.
NOTE: To select more than one Scan Station, press the Ctrl or Shift
key and click the mouse button. The selected Scan Stations
will be highlighted.
2. Select Scanners>Configuration>File Upload. The Open dialog
box will be displayed.
3. Select the configuration file that you want to upload and click Open.
The message, Uploading, please wait will be displayed while the
file is being uploaded.
NOTE: If the file fails to load, the message, Upload Error - there
was an error uploading the configuration file to:
Scanner Name will be displayed.
1. Insert your USB drive in the USB port on the Scan Station.
NOTE: If the Scan Station configuration previously had a password
assigned to it, you will be prompted to enter that password
before proceeding with any changes.
2. Click Update.
A-61628 December 2011