Kodak Scan Station 520 EX Administrator's Manual page 10

2 Pre-installation Checklist
It is recommended that you fill out this worksheet before configuring the Kodak Scan Station 500. This
network information is needed to create an administrative configuration file to complete the installation.
Locate any information you are unsure of before creating the administrative configuration file. If you have
trouble filling out this worksheet, see the person who manages your network. See the section entitled,
"Administrative and user configuration files" in Chapter 3 for more information.
NOTE: This installation shows what you will need to install the Scan Station as of the date of this
document. As our products continue to improve, check the Kodak website
(to://www.Kodak.com/go/disupport) for the latest version.
Language Settings — found under the Settings button in the Configuration Organizer or
Scan Station when using the KSS500 - Scanner Admin application.
Parameter Name
Language The application display language
Device Settings — found under the Settings button in the Configuration Organizer or Scan
Station when using the KSS500 - Scanner Admin application.
Parameter Name
Device Name NETBIOS name of the Scan
Station.
IMPORTANT: You will need the
unique device name to add a
Scan Station to the Scanner
Administration application.
The Scan Station by factory default
has its own unique name
(e.g., OEMxxxxxxx)
IP Address Settings — Automatic
Automatic (DHCP) This is the default.
IP Address Settings — Static
Static (IPv4) Standard IPv4 address
• IP Address (e.g., 192.0.0.1)
(required) Scan Station's IP address
• Subnet Mask
Scan Station's Subnet Mask
(required) (e.g., 255.255.255.0)
• Default Gateway IP address of default gateway on
(required) the network
• Preferred DNS IP address of domain name Server
Server
#1
(required)
• Alternate DNS IP address of the alternate domain
Server name Server #2
• Preferred WINS IP address of Windows Internet
Server
Name Server #1
A-61628 December 2011
Description/Sample
Description/Sample
Your Setting
Default: English.
Your Setting
It is recommended that you do not
change this setting. Must be unique
(up to 15 characters) on the network/
subnet.
If selected, the IP address, subnet
mask, and DNS server of the Scan
Station are set automatically by the
DHCP server.
Complete this and the other
network sections only if you are
not using DHCP.
Only these numbers are allowed: 0,
128, 192, 224, 248, 252, 254 and 255.
If this number is incorrect, you may
not be able to reach some network
locations.
Notes
Notes
2-1