Mazda 6 Installation Instructions Manual page 9

(1)
Trunk side pocket
Fasteners
Trunk side pocket
Vehicle front
Trunk side trim removal
Trunk end trim
Weather strip
Fasteners A
Trunk side trim
Fasteners
Vehicle front
【Without Temporary Spare Tire】
1. Set the trunk covering aside.
2. Remove the trunk board in the direction of the arrow (1) shown in
Trunk board
Trunk side pocket removal
1. Remove the fasteners. (LH side only)
2. Remove the trunk side pocket in the direction of the arrow shown
Trunk side pocket
Trunk end trim removal
1. Partially peel back the trunk lid weather strip.
2. Remove fasteners A.
Vehicle front
3. Remove fasteners.
the figure.
in the figure.
9