9.OPERATION CHECK
1. Reinstall parts in the reverse order of the installation procedure in【PARTS REMOVAL】.
2. Refer to "Required servicing after disconnecting/connecting negative battery cable" in the vehicle workshop
manual or the owner's manual to restore the vehicle functions.
3. Perform reinstallation and inspection of the vehicle parts.
10.OPERATION CONDITION
■
Is available when the ignition is switched ON.
■
The sensor detects obstructions when the shift lever is in the R position.
・ Alarm (beeper) sound
■
The beeper operates (sounds) as follows while the system is operating.
◇ Rear sensor
Approx. 2-1.5 ft (23.62-17.71 in)
Approx. 1.5-1 ft (17.71-11.81 in)
Within approx.1 ft (11.81 in)
22