Mazda 6 Installation Instructions Manual page 21

Vehicle wiring harness
Ground wire
Vehicle wiring harness
Main harness (R)
Tie wrap
Vehicle wiring harness
Tie wraps
Tie wrap
Harness (short and long)
Vehicle front
Ground bolt
Vehicle front
Main harness (R)
Buzzer harness
Ground wire
Vehicle front
5. Tighten the ground wire together with the ground bolt on the
vehicle side.
Ground Bolt tightening torque : 8.8－12.7 N･m
6. Secure the main harness (R) to the vehicle wiring harness at 1
location using tie wrap.
CAUTION
• Cut off the remaining part using nippers or a similar tool
when securing using tie wrap.
7. Secure the main harness, harness (short and long) and to the
vehicle wiring harness at 3 locations using tie wraps.
CAUTION
• Cut off the remaining part using nippers or a similar tool
when securing using tie wraps.
21