a.
Remove the eight Phillips PM2.0×3.0 screws (1) that secure the hinge assemblies to the
display panel.
b.
Remove the hinge assemblies (2).
The hinge assemblies are available in the Display Hinge Kit using spare part number 733634-001.
20.
If it is necessary to remove the LVDS board:
a.
Disconnect the display panel cable (1) from the display panel.
b.
Disconnect the LVDS board cable (2) from the display panel.
c.
Remove the two Phillips PM1.5×3.0 screws (3) that secure the LVDS board to the display panel.
Component replacement procedures
85