Hard Drives, Primary And Secondary - HP ZBook 17 G2 Maintenance And Service Manual

Hard drives, primary and secondary

NOTE: The hard drive spare part kit does not include the hard drive bracket, cover, or screws. The hard drive
bracket, cover, and screws are included in the Hard Drive Hardware Kit, spare part number 734280-001.
Description
1-TB, 7200-RPM, SATA, 9.5-mm
1-TB, 5400-RPM, SATA, 7.0-mm
750-GB, 7200-RPM, SATA, 7.0-mm
500-GB, 7200-RPM, SATA, 7.0-mm
500-GB, 7200-RPM, SED, 7.0-mm
500-GB, 5400-RPM, SATA, FIPS, 7.0-mm
Before removing the primary hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Position the computer upside down on a flat surface.
5. Remove the battery (see
6. Remove the service cover (see
7. Loosen the 3 captive hard drive screws (1) that secure the hard drive to the computer.
8. Release the hard drive latch (2).
9. Grasp the latch and remove the hard drive (3) from the hard drive bay.
48 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Battery on page 45).
Service cover on page 47).
Spare part number
766644-001
778192-001
778191-001
703267-001
703268-001
730946-001