BIOS Setup Utility
3-4.1 DRAM Clock/Drive Control
Caution: Change these settings only if you are already familiar
with the Chipset.
The [DRAM Clock/Drive Control] option changes the values of the chipset
registers. These registers control the system options in the computer.
CMOS Setup Utility – Copyright ( C ) 1984-2001 Award Software
Current FSB Frequence
Current DRAM Frequency
DRAM Clock
DRAM Timing
x SDRAM Cycle Length
x Bank Interleave
Precharge to Active(Trp)
DRAM Command Rate
:Move
Enter:Select
F5:Previous Values
After you have completed the changes, press [Esc] and follow the
instructions on your screen to save your settings or exit without saving.
DRAM Clock/Drive Control
100 MHz
133 MHz
By SPD
manual
2.5
Disabled
3T
2T Command
+/-/PU/PD:Value
F6:Fail-Safe Defaults
68
SY-K7V DRAGON
Menu Level
F10:Save
ESC:Exit
F7: Optimized Defaults
Item Help
F1:General Help