Table of Contents
Advertisement
REBUILDING AN ARRAY
This command effectively copies or overwrites data from an existing data drive in
the array on to a blank drive. The operation will be typically used when a failed
drive has been replaced with a new drive as part of a mirrored array.
1.
To perform a Rebuild, choose the Array Tab View.
2.
Right click the array number and choose Rebuild from the context menu.
3.
Once Rebuild is selected, you will be asked to "Initialize Rebuild process on
Array #" by clicking OK.
Using Rebuild Wizard
1.
Initiating rebuild array will open the Rebuild Wizard Step 1 screen shown
below.
2.
Select the Target drive which will receive data. Make sure you select the blank
new or replacement drive. The unselected drive will contain "good" data. It
will be the remaining working drive of an array, or a system drive containing
existing data that you wish to mirror.
150
Advertisement
Table of Contents
