Table of Contents
Advertisement
Using The FastCheck™ Monitoring Utility
You can monitor the operating status of all arrays and drives configured on the
FastTrak100-Lite using the supplied FastCheck monitoring utility for
Windows-based operating systems. FastCheck generates visual and audible
messages alerting you of possible problems with the disk array or controller.
FastCheck visually identifies the physical location of attached drives on the
FastTrak100-Lite by IDE channel (1 or 2) and setting (Master/Slave/Cable-Select).
It also displays which drives are included as part of individual arrays.
Administrators can customize FastCheck to maintain operating logs and event
notification, set Password access to the utility, and schedule maintenance on
Mirrored (RAID 1) or a Striped/Mirrored (RAID 0/1) arrays.
INSTALLING FASTCHECK
1.
From the Start Button on the Windows Taskbar, choose Run.
2.
Insert Promise FastCheck Utility Diskette.
3.
In the Run dialog box, type in "A:\" and click OK.
4.
Follow the directions from the setup program.
5.
During installation, click YES when prompted to run the utility on every
startup. If NO is selected, FastCheck will not initialize during startup. You
may manually execute the utility via the Start button.
142
Advertisement
Table of Contents
