2-3.7 Quick Bios Setup - SOYO SY-K7V DRAGON User Manual

K7 ath1on & duron processor supported via kt266 agp/pci motherboard 100/133 mhz front side bus supported atx form factor
Hide thumbs Also See for SY-K7V DRAGON:
Table of Contents

Advertisement

Hardware Installation
Repeat this operation until you get the following screen.
3. The BIOS Setup screen appears:
CMOS Setup Utility – Copyright ( C ) 1984-2001 Award Software
SOYO COMBO Feature
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations
Esc : Quit
F10 : Save & Exit Setup

2-3.7 Quick BIOS Setup

This Motherboard does not use any hardware jumpers to set the CPU
frequency. Instead, CPU settings are software configurable with the BIOS
[SOYO COMBO FEATURE]. The [SOYO COMBO FEATURE]
combines the main parameters that you need to configure, all in one menu,
for a quick setup in BIOS.
After the hardware installation is complete, turn the power switch
on, then press the <DEL> key during the system diagnostic checks
to enter the Award BIOS Setup program. The CMOS SETUP
UTILITY will be shown on the screen. Then, follow these steps to
configure the CPU settings.
Change CPU's Clock & Voltage
45
SY-K7V DRAGON
PC Health Status
Load Optimized Defaults
Load Fail - Safe Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
: Select Item

Advertisement

Table of Contents
loading

Table of Contents