FastBuild (tm) Utility 1.xx (c) 1995-2000 Promise Technology, Inc.
Array No RAID Mode Total Drv
Array 2
Stripe Block: Not Available
Channel:ID
Capacity (MB)
1 : Slave
[↑] Up [↓] Down
11. Under [Select Drive for Rebuild], highlight the replacement drive.
12. Press [Enter] and confirm that the data will be copied on to the selected drive.
All data on the replacement drive will be written over with mirrored
information from the array drive. A progress bar will appear as below.
Please Wait While Duplicating The Image
10% Complete
13. Once the rebuild process is complete, the user will be asked to reboot the
system.
VIEWING CONTROLLER SETTINGS
The Controller Configuration <6> menu selection allows you to enable or disable
the FastTrak100-Lite BIOS from halting (the default) if it detects an error on boot
up. You may also view the system resources (Interrupt and I/O port address) of
FastTrak's data channels.
[ Rebuild Array Menu ]
Mirror
[ Select Drive for Rebuild ]
Drive Model
QUANTUMCR8.4A
[ Keys Available ]
[ESC] Exit
132
Status
2
Critical
[Enter] Select
8063