Table of Contents
Advertisement
the message "Setup is inspecting your computer's hardware
configuration..." appears.
1c. CD-ROM Install: Boot from the CD-ROM. Press <F6> after the message
"Press F6 if you need to install third party SCSI or RAID driver" appears.
2.
When the "Windows 2000 Setup" window is generated, press "S" to Specify
an Additional Device(s)
3.
Press "O" to select "Other" and press the "Enter" key.
4.
Insert the diskette* into drive A: and press "Enter" key.
5.
Choose "Win2000 FastTrak100-Lite" from the list that appears on
screen, then press the "Enter" key.
6.
The Windows 2000 Setup screen will appear again saying "Setup will
load support for the following mass storage devices:" The list will
include "Promise FastTrak100-Lite"..
NOTE: If you need to specify any additional devices to be installed, do so at
this time. Once all devices are specified, continue to step 7.
7.
From the Windows 2000 Setup screen, press the Enter key. Setup will
now load all device files and then continue the Windows 2000
installation.
* Copy the FastTrak Win2000 drivers from the SOYO CD to a floppy disk.
134
Advertisement
Table of Contents
