Table of Contents
Advertisement
Hardware Installation
SY-K7V DRAGON
Step 1. Select [STANDARD CMOS SETUP]
Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to
"Auto".
Step 2. Select [LOAD OPTIMIZED DEFAULTS]
Select the "LOAD OPTIMIZED DEFAULTS" menu and type "Y" at the
prompt to load the BIOS optimal setup.
Step 3. Select [SOYO COMBO FEATURE]
Set the [CPU Clock] to 100/133MHz, depending on the Front Side Bus of
your CPU.
To overclock your CPU's Front Side Bus, [CPU Clock 1MHz STEP]
enables you to overclock your CPU Front Side Bus in 1MHz increment or
you can input the desired FSB value of the CPU.
Note: The maximum FSB you can overclock for a 100MHz FSB CPU is
132MHz and 233MHz for 133MHz FSB CPU.
Step 4. Select [SAVE & EXIT SETUP]
Press <Enter> to save the new configuration to the CMOS memory, and
continue the boot sequence.
46
Advertisement
Table of Contents
