Table of Contents
Advertisement
Windows 95/98
Installing Drivers During Windows 95/98 Installation
The following three sections detail the installation of the FastTrak100-Lite drivers
while installing Windows 95/98. If you're installing the FastTrak100-Lite drivers
on a system with Windows 95/98 already installed, see "Installing Drivers with
Existing Windows 95/98" on page 138.
1.
After making an array & configuring the hard drive(s), partition and
format your hard drive(s), if necessary.
2.
Install Windows 98 normally.
3.
After installation, go the "Start" menu and choose "Settings."
4.
From the "Settings" menu, choose "Control Panel."
5.
In the "Control Panel" window, double-click on the "System" icon.
6.
In the "System" window, choose the "Device Manager" tab.
7.
In the hierarchical display under "Other Devices" is a listing for "PCI
RAID Controller." Choose it and then press the "Properties" button.
8.
Choose the "Driver" tab in the "Properties" window, choose "Update
Driver," and then press "Next."
9.
Choose "Search for a better driver than the one your device is using
now (recommended)," then press "Next."
10.
Insert the "SOYO CD" into the CD-Rom drive, then press "Next."
11.
Choose "Specify Location," and then type
"D:\RAID\promise\Driver\Win9x-ME" in the text box. Assuming D: is
your CD-Rom.
12.
Press the "Next" button. A message informing you that Windows 98
has found "Win95-98 FastTrak100-Lite (tm) Controller" should appear.
13.
Press "Next," then "Finish," then "Yes" when asked if you want to
restart your computer.
Windows 98
136
Advertisement
Table of Contents
