Installation Options; Tabletop To Wall-Mount Installation - AT&T CL4940 User Manual

Getting started

Installation options

If you want to mount your telephone on a wall, use the provided wall-mount
bracket to connect with a standard dual-stud telephone wall-mounting plate.
If you do not have this mounting plate, you can purchase one from many
hardware or consumer electronics retailers. Professional assistance may be
required to install the mounting plate.

Tabletop to wall-mount installation

To install the telephone base in the wall-mount position, make sure you first
unplug the power adapter cord and telephone line cord from the telephone
base and wall outlets.
1. Lift the handset and place it aside. Hold down the switch hook on the
telephone base, then slide the handset tab upwards to remove it from the
slot. Rotate the handset tab 180 degrees. Push the handset tab down into
the slot so it locks into position.
Switch hook
Handset tab
2. Align the tabs on the wall-mount bracket to the slots at the back of the
telephone base. Insert tab A on the top into its corresponding slot and click
tabs B into their corresponding slots.
A
B
6