Installation Options - AT&T TL72108 User Manual

Getting started

Installation options

NOTE: The mounting bracket must be used for both tabletop use and wall mounting positions
The telephone base comes with the mounting bracket already installed for
desktop use. If wall mounting is desired, a telephone outlet wall mounting
plate with mounting studs is required. This mounting plate with studs may be
available for purchase from any handware or consumer electronics retailers
and may require professional installation.
Desktop to wall mount installation
To install the telephone base in the wall mount position, make sure that you
first unplug all cords connected to the telephone base before you begin.
1. Press the bracket upwards until
the bracket clicks into place and
is secure.
2. Plug the telephone line cord
and power adapter plug into the
telephone base and place the
cords in the bracket grooves.
3. Plug the power adapter and
telephone line cord into the wall
outlets, then align the mounting
studs on the telephone outlet
plate with the mounting holes on
the bracket.
4. Place the telephone base
mounting holes just above the
mounting studs, then slide the
telephone base down until it is
secure.
8