Last Number Redial; Equalizer - AT&T CL4940 User Manual

Telephone operation
Telephone operation

Last number redial

The telephone stores the last telephone number dialed (up to 32 digits).
To redial a number:
1. To display the most recently called number, press
REDIAL/
PAUSE
2. Lift the handset or press
-OR-
1. Lift the handset or press
2. Press REDIAL/
To delete a redial entry:
While the screen displays the redial number, press DELETE X to delete
•
the number from the redial memory. The screen shows Deleted with a
confirmation tone.
NOTES:
• The screen shows only the last 15 digits if the number has more than 15 digits.
If the redial list is empty, you will see Redial empty on the screen and hear an error tone
•
when you press REDIAL/

Equalizer

The telephone equalizer enables you to change the quality of the audio to
best suit your hearing.
While on a call, or listening to a message or announcement, press
/EQUALIZER to one of the four equalizer settings, Natural (default setting),
Treble 1, Treble 2 or Bass. The screen shows EQ changed to Natural,
EQ changed to Treble 1, EQ changed to Treble 2 or EQ changed to Bass,
respectively. The current setting shows on the screen for 2 seconds.
NOTES:
• The current equalizer setting remains unchanged until a new setting is selected.
• If you press /EQUALIZER in idle mode, the telephone shows To change EQ set during call
with an error tone.
when the telephone is not in use.
SPEAKER to call.
SPEAKER.
to dial the number.
PAUSE
.
PAUSE
15
Redial
885-883-2445