Clean Operation - Toshiba RAS-M10PKVP-E Service Manual

Item Operation flow and applicable data, etc.

16. Clean operation

Unit now performing cooling or dry operation
Only S.CLEAN indicator lights, and clean operation starts
Time set now elapses
• During clean operations: The louver opens
slightly. The indoor fan operates continuously at a
speed of 450 rpm.
Clean operation times
• To stop an ongoing clean operation at any time
Push the start / stop button on the remote controller twice during the clean operation.
(After pushing the button for the first time, push it for the second time without delay
(within 10 minutes).)
Push "STOP" button
Operation stops
Operation mode
Cooling: Auto (cooling) Dry
Heating: Auto (heating)
Auto (fan only)
Shutdown
1. Purpose
The clean operation is to minimize the growth
of mold, bacteria etc. by running the fan and
drying so as to keep the inside of the air
conditioner clean.
Clean operation
When the cooling or dry operation shuts
down, the unit automatically starts the clean
operation which is then performed for the
specified period based on duration of the
operation which was performed prior to the
shutdown, after which the clean operation
stops.
(The clean operation is not performed after a
heating operation.)
2. Operation
1) When the stop signal from the remote
controller is received, the S.CLEAN
indicator (Orange) on the main body lights,
and the clean operation starts.
(Neither the OPERATION indicator nor the
PURE indicator light.)
2) The period of the clean operation is
determined by the duration of the operation
performed prior to the reception of the stop
code.
3) After the clean operation has been
performed for the specified period, the unit
stops operating.
Clean operation times
Operation time
Up to 10 minutes
10 minutes or longer
No clean operation performed
– 63 –
Description
Clean operation time
No clean operation performed
(0 minutes)
4 hours