Remote Controller And Its Functions; Parts Name Of Remote Controller - Toshiba RAS-M10PKVP-E Service Manual

9.4 Remote Controller and Its Functions

9-4-1. Parts Name of Remote Controller

1
Infrared signal transmitter
Transmits signals to the indoor unit.
2
button
Push the button to start operation.
(A receiving beep is heard.)
Push the button again to stop operation.
(A receiving beep is heard.)
If the receiving beep isn't heard from the indoor unit,
push the button again.
3
Mode select button (MODE)
Push this button to select a mode.
Each time you push the button, the modes cycle in
order from A: Auto change over control,
: COOL, : DRY,
(A receiving beep is heard.)
4
Temperature button (
... The temperature setting is raised to 30°C.
... The temperature setting is lowered to 17°C.
(A receiving beep is heard.)•••
5
Set horizontal air flow button (FIX)
Push this button to adjust the horizontal air flow
direction. (A receiving beep is heard.)
6
Set vertical air flow button (FIX)
Push this button to adjust the vertical air flow
direction. (A receiving beep is heard.)
: HEAT and back to A.
)
– 69 –
7
Auto louver button (SWING)
Each time you push the SWING button, you can
change the swing mode. (A receiving beep is heard.)
(Vertical swing → Horizontal swing → Vertical and
Horizontal swing → Stop swinging)
Push the button again to stop the swinging mode.
(A receiving beep is heard.)
8
ON timer button (ON)
Use this button to change the clock and ON timer
times.
To move up the time, push of the ON
To move down the time, push of the ON
9
OFF timer button (OFF)
Use this button to change the OFF timer times.
To move up the time, push
To move down the time, push
10
Reserve button (SET)
Push this button to store the time settings.
(A receiving beep is heard.)
11
Cancel button (CLR)
Push this button to cancel the ON timer and OFF
timer. (A receiving beep is heard.)
(A receiving beep is heard.)
12
High power button (Hi POWER)
Push this button to start high power operation.
13
Memory button (MEMO)
Push this button to ready for storing the settings.
Hold down the button for 3 seconds or more to store
the mark is displayed.
14
Automatic operation button (AUTO)
Push this button to operate the air conditioner
automatically. (A receiving beep is heard.)
15
SLEEP MODE button
Push this button to start sleep mode.
16
MY COMFORT button
Push this button to operate the air conditioner
according to the settings stored using the MEMO
button.
17
PURE button (PURE)
Push this button to start the electrical air purifying
operation.
Push the button again to stop operation.
18
Fan speed button (FAN)
Push this button to select the fan speed.
When you select AUTO, the fan speed is
automatically adjusted according to the room
temperature.
You can also manually select the desired fan speed
from five available settings.
(LOW , LOW+
HIGH ) (A receiving beep is heard.)
button.
button.
of the OFF button.
of the OFF button.
, MED , MED+ ,