1.5 Connecting the cables
Connecting the power cord
Connect the power cord to the power plug located at the side of the terminal's base. Connect the
power cord to the power supply and the plug to an electrical outlet.
Connecting the Ethernet cable
Connect the Ethernet cable to the ETH-port located behind the terminal's base. The other end of
the cable is connected either to a broadband modem or plug.
POINT TRANSACTION SYSTEMS OY
Vanha Nurmijärventie 62 FI-01670 VANTAA | puh: +358 (0)9 477 4330 | fax: +358 (0)9 436 2490
www.point.fi
Page
8 (33)