Batch Time; Cashier Number; Time And Date Settings; Fixed Ip-Address - VeriFone VX820 DUET Manual Manual

2.3 Batch time

The terminal will send the batch automatically if you have set a particular time for this function. The
sending time can be at any time. We recommend that the time is after your stores
closing time. Even hours are not recommended (e.g. 2100).
If you do not want to use the automatic sending time, set it to be at 9999. The
batch must then be sent manually.
To set the sending time, choose BATCH TIME from the EDIT menu. Type on the screen the
sending time that you want with four digits (e.g. 0315).

2.4 Cashier number

If you have in use more than one terminal, it is important to specify each terminal by their cashier
number. The cashier number is printed on every receipt so that it is easy to discover which
transaction has been done with which terminal in any problem cases.
From the EDIT menu, choose CASHIER NUMBER.
Type on the screen the cashier number that you want for the terminal with three digits (e.g. 001).

2.5 Time and date settings

Select TIME SETTINGS from the EDIT menu.
Choose ADJUST CLOCK.
Select the information you want to change, type in the new value and press Enter.

2.6 Fixed IP-address

If the terminals network uses fixed IP-addresses, they must be defined to the terminal.
Select TCP/IP PARAMETERS from the EDIT menu and choose FIXED IP.
Activate IP address = the IP-address for the terminal
Default gateway = Default gateway
SUBNET MASK = Subnet mask

2.7 Power options

Select POWER OPTIONS from the EDIT menu.
Shut down timer = Time it takes that the terminal automatically shuts down. The time is indicated in
seconds (e.g. 180 = 3 min.) The terminal does not shutdown if it is connected to the power cord. If
the sleep timer is enabled the terminal also will not shut down. If you want to disable the shut down
timer, type 0 as the value.
POINT TRANSACTION SYSTEMS OY
Vanha Nurmijärventie 62 FI-01670 VANTAA | puh: +358 (0)9 477 4330 | fax: +358 (0)9 436 2490
www.point.fi
Page
12 (33)