Online bat percent = minimum battery reserve that the terminal requires to work. This is indicated
in percentage (e.g. 20).
GPRS shut down timer = the function is not used in this model.
2.8 Contrast
You can adjust the screen's contrast from the CONTRAST-settings with the minus and plus icons.
Select the Menu icon from the screen and choose CONTRAST.
2.9 Sounds
To disable the terminal's button sounds, select SOUND from the EDIT menu and choose OFF.
2.10 Audit log IP
With the audit log IP-function, your payment terminal sends log information to a desired IP-
address. The terminal logs include error and update information etc. from the payment terminal.
To input your desired IP-address, select the Settings icon from the screen and press enter.
Choose Edit, and navigate down with the arrow icon and select Audit log IP.
Input the IP-address; to get a dot, press 1 repeatedly until the correct character is on the display.
3. DOWNLOADS
3.1 Downloading applications
NOTE! Send the batch from the terminal before downloading.
To send the batch, select the Reports icon from the screen, press Enter and choose SEND
BATCH.
Select the Settings icon from the screen and press Enter.
Choose APP. DOWNLOAD
Select APP + PARAMS or ONLY APPLICATION
The terminal downloads the application. A white bar appears on the screen, which gradually turns
black as the download progresses.
NOTE! Parameters must be downloaded to the terminal after the application download has
ended. Guides for parameter downloading are listed below.
3.2 Parameter downloading
Select the Settings icon from the screen and press Enter.
Choose DOWNLOAD
Choose FROM LOADPOINT
POINT TRANSACTION SYSTEMS OY
Vanha Nurmijärventie 62 FI-01670 VANTAA | puh: +358 (0)9 477 4330 | fax: +358 (0)9 436 2490
www.point.fi
Page
13 (33)