1. BEFORE USE
1.1 Important
NOTE! If these instructions are not followed and the terminal is damaged it will void the
warranty!
•
Protect the power cord and modem. If they are damaged they are not to be used anymore.
•
The terminal is not waterproof or dustproof, and is intended for indoor use only.
•
The warranty of the terminal will void if it is exposed to water or dust.
•
Do not use the terminal next to water or moist areas.
•
Do not use below 0° C degrees.
•
Never place anything inside the chip slot or connection ports that are not meant there. This
might seriously damage the terminal.
•
If the terminal is damaged contact Point's maintenance service. Never try to fix the terminal
by yourself.
•
Use only appropriate paper with the terminal's printer. Poor quality paper can jam the
printer and create excessive paper dust.
•
The terminal should not be connected to the same electrical outlet as a device which is not
using an electrical transformer, or which transformer's voltage is too high.
•
Never use thinner, trichloroethylene, or ketone-based solvents- they may cause
deterioration of plastic or rubber parts. Do not spray cleaners or other solutions directly onto
the keypad.
•
Disconnecting the power during a transaction may cause transaction data files not yet
stored in terminal memory to be lost.
POINT TRANSACTION SYSTEMS OY
Vanha Nurmijärventie 62 FI-01670 VANTAA | puh: +358 (0)9 477 4330 | fax: +358 (0)9 436 2490
www.point.fi
Page
4 (33)