Stage 2; Mounting The Ff 20 Speakers; Ff 120 Flat Field Ceiling Speakers; Speaker Cable - Extron electronics VoiceLift Installation Manual

Stage 2:

Mounting the
FF 20 Speakers
This stage consists of installing and connecting the FF 120 speakers (VLS only).
NOTE: The installation must conform to national and local electrical codes and UL

FF 120 Flat Field Ceiling Speakers

Figure 12.
Where they go:
What they do:

Speaker Cable

Figure 13.
What it does: For speaker installation, connects the ceiling speakers to the switcher.
VoiceLift System with PVS 405D Installation Guide • Installation — Stage 2
22
requirements (see the FF 120 Flat Field Speakers User Guide for details).
FF 120 Speakers (2)
Seismic Tabs
(1 at each end)
T-rails (2)
FF 120 Ceiling Speaker
Installed in ceiling tiles at locations selected for best acoustics
Receive and output the audio signal from the PVS 405D
switcher.
SPK 18, 35 feet (10.6 m)
SPK 18 Speaker Cable
Terminal Cover
Cable Clamps (2)
Anchor Rings (2)