Smb Printing; Internet Connection - Toshiba e-STUDIO 520 Printing Manual

2 Installing Client Software for Windows
To print with a Raw TCP connection, this equipment must be configured to enable Raw TCP
Print Service. Ask your administrator if the Raw TCP Print Service is enabled.
To print with a LPR connection, this equipment must be configured to enable LPD Print Ser-
vice. Ask your administrator if the LPD Print Service is enabled.

SMB Printing

Available for:
This equipment can be used with an SMB printer connection that allows you to connect to this
equipment using File and Printer Sharing for Microsoft Networks service. SMB printing is the
common method used to set up the printer. However, SMB printing is not suitable for printing a
large amount of documents.
P.88 "Installing Client Software for SMB Printing"
It assumes using SMB printing in a small network. If you can use the Windows NT 4.0, Windows
2000, Windows XP, Windows Server 2003, or Windows Vista as a print server, it is recom-
mended to set up for printing via Windows print server. For further information about setting up
printing via a Windows print server, see the Network Administration Guide.

— Internet Connection

Available for:
24 About the Installation
Windows 98, Windows Me, Windows NT 4.0, Windows 2000, Windows
XP, Windows Server 2003, Windows Vista
Network Environment over TCP/IP
Setting up SMB Printer
Connection
Windows 2000, Windows XP, Windows Server 2003, Windows Vista
Connecting over Internet
Setting up the IPP
printer connection
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
Windows Vista
Windows 2000
Windows XP
Windows Server 2003
Windows Vista