Toshiba e-STUDIO 520 Printing Manual page 91

7
When the equipment is automatically found in the network, the
"Device on Network" option is selected and the found devices are
displayed in the list. Select the equipment that you want to connect
and click [Next].
The Select Program Folder screen is displayed.
When the equipment is not automatically found in the network, the "Message" dialog box
appears. In that case, proceed the procedure below to select the network queue manu-
ally.
1. The "Message" dialog box appears, and click [Continue].
2. The Select Port screen is displayed, and click [Browse].
3. The Browse for Folder dialog box appears. Locate this equipment in your network,
select the "print" queue, and click [OK].
Installing Client Software for SMB Printing 91