Smb Printing - Toshiba e-Studio 352 Printing Manual

Raw TCP/LPR Printing
Available for: Windows NT 4.0, Windows 2000, Windows XP, Windows Server 2003
Connecting over TCP/IP Network
Setting up the Raw TCP
or LPR printer connection
This equipment allows you to connect using Raw TCP or LPR which is available for Windows
NT 4.0, Windows 2000, Windows XP, and Windows Server 2003. If you use Windows NT 4.0,
Windows 2000, Windows XP, or Windows Server 2003, Raw TCP/LPR printing may be most
suitable.
P.35 "Installing Client Software for Raw TCP/LPR Printing"
To print with a Raw TCP connection, this equipment must be configured to enable Raw TCP
Print Service. Ask your administrator if the Raw TCP Print Service is enabled.
To print with a LPR connection, this equipment must be configured to enable LPD Print Ser-
vice. Ask your administrator if the LPD Print Service is enabled.

SMB Printing

Available for: Windows 98, Windows Me, Windows NT 4.0, Windows 2000,
Windows XP, Windows Server 2003
Network Environment over TCP/IP
Setting up SMB Printer
Connection
This equipment can be used with an SMB printer connection that allows you to connect to this
equipment using File and Printer Sharing for Microsoft Networks service. SMB printing is the
common method used to set up the printer. However, SMB printing is not suitable for printing a
large amount of documents.
P.61 "Installing Client Software for SMB Printing"
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
About the Installation 21