Toshiba e-STUDIO 520 Printing Manual page 228

5 Printing from Windows
2
Display the [Configuration] tab, check off the "Enable SNMP Com-
munication" option, and set the following options.
Model Selection — This sets the model type of the equipment.
External LCF — Check this when the External LCF is installed.
Inserter Unit — Check this when the Inserter Unit is installed.
Automatic Duplexing Unit — This sets whether or not optional automatic duplexing unit
is installed.
Drawers — This sets whether the drawers or LCF (not available for some countries or
regions) are installed.
Finisher — This sets whether or not optional finisher is installed.
Hole Punch Unit — This sets whether or not optional hole punch unit is installed.
Memory — Select the size of memory installed.
LCF is not available for some countries or regions.
For more information about each item, see descriptions about the Configuration Tab.
3
Click [Drawer Settings].
The Drawer Settings dialog box appears.
228 Before Using the Printer Driver