Finishing Tab - Toshiba e-STUDIO 520 Printing Manual

LCF is not available for some countries or regions.
The selectable values vary depending on the optional devices installed on this equipment
and their configuration on the Configuration tab.
When the paper size settings on the Configuration tab are differ from the paper size set-
tings in the equipment, the paper source setting is ignored and the equipment may
prompt to set the paper in the bypass tray.
5) Paper Type
This sets the media type of the paper.
- Plain — Select this when printing on 20 lbs plain paper (64-80 g/m2 plain paper).
- Thick1 — Select this when printing on 24-28 lbs thick paper (81-105 g/m2 thick paper).
- Thick2 — Select this when printing on 32-90 lbs thick paper (106-163 g/m2 thick paper).
- Thick3 — Select this when printing on 110 lbs thick paper (164-209 g/m2 thick paper).
- Transparency — Select this when printing on transparent sheets.
6) Number of Copies
This sets the number of printed copies. You can set any integer from 1 to 999.
7) Orientation
This sets the paper printing direction.
- Portrait — The document is printed in the portrait direction.
- Landscape — The document is printed in the landscape direction.

Finishing Tab

The Finishing tab allows you to enable sort printing, 2-sided printing, N-up printing, stapling and
punching.
1) Copy Handling
This sets how to sort the printed sheet when numerous copies are made for printing.
- Sort Copies — Select this for sort-printing (1, 2, 3... 1, 2, 3...).
1
2
3
4
5
6
Setting Up Print Options 247