4.3.5
Roller Assembly-ADF, CIS (contact image sensor), Lever-PC1 and PC2
(1) Disassembly procedure
a)
First, carry out the disassembly procedure up to the point of the 4.3.2 and 4.3.3.
b)
Dismount the Printer-Unit.
(See Section 4.3.18)
c)
Remove the Frame assembly-Scanner (L) by removing the four screws 1 and the four
connectors.
Screw 1
41309401TH Rev.4
Frame Assembly-Scanner
Screw 1
162 /