Oki OKIFAX4550 Maintenance Manual page 104

No. Item
8 Local copy
9 Multiple local copy
10 Manual loading feeder
11 Broadcast
(Memory transmission)
12 Delayed transmission from the
memory
13 Polling transmission
(To be polled)
14 Polling reception
15 Bulletin polling
16 Transmission preparation (Hop-
per)
41309401TH Rev.4
Table 2.6 (5/7) User's Functions
Printing resolution:
Horizontal: 300 dpi (Fine, EX Fine), 200 dpi (SDT)
Vertical:
Up to 50 copies.
One single sheet from the feeder below the paper exit can be
copied.
Example of sheets:Transparency for an overhead projector
Max. 90 (OKIFAX4550), Max. 120 (OKIOFFICE87) remote
locations can be specified by the following means:
• One-touch keys (with of without a group list).
• Two/three-digit auto dial codes.
• 10 keypad dial number (Max.)
One delayed time of calling for this feature can be specified
unless any other delayed calling feature has been specified.
The combination of 1 delayed broadcast and one immediate
calling of broadcast is possible.
However, the setting of delayed transmission and delayed
broadcast must not exceed the total number of specified time
which is different according to the machine.
When multiple locations are specified for one broadcast
(1) The fax prints a broadcast entry report, if specified in
operating sequence.
(2) The fax can print a broadcast confirmation report. (FP +
02 To enable or disable this printout)
The fax can automatically transmit documents at five speci-
fied times from the memory.
Document(s) placed on the feeder can be collected by a
remote station.
The fax can collect documents from one remote station.
A kind of polling transmission. Bulletin polling enables polling
transmission many times until deleting the documents stored
in the memory.
An operator can prepare documents for transmission even
while the fax is enagaged in message reception. They will be
automatically transmitted upon completion of the reception.
An operator can also prepare documents for transmission
during transmission from memory.
Specifications
3.85 (STD), 7.7 (Fine) or 15.4 line/mm (EX
Fine)
104 /