G4 Protocol Dump - Oki OKIFAX4550 Maintenance Manual

6.14.4 G4 Protocol Dump

Purpose:
To allow the serviceman to obtain a list of protocol signals transmitter and receiver.
Method:
The report will be manually printed out for maintenance purpose.
If it is G4, the G4 communication protocol dump is printed out.
1. Title of the report
2. Date and time when the report was printed
3. Sender ID
4. Date of communication
5. Time of communication
6. One message transmission/reception time
7. Identification of remote station
• CSI and/or telephone number
8. Mode of transmission/reception according to ITU-T designation
9. Total number of pages in communicaiton
10. Identification of the result of the communication
11. Service code
12. D channel
13. B channel
14. COMMN MODE
15. COMMN SPEED
16. FLOW CONTROL PARAM.
17. TID
18. SETUP
19. DISC
20. CR/CN, CA/CC, CQ/CI, RQ/RI, SQ/SI (page 2)
21. TBR/TCC/TCR/TCA (page 2)
22. CSS (page 2)
23. RSSP/RSSN (page 2)
24. CD/CL (page 2)
25. RDCLP (page 2)
26. CDS (page 2)
27. CDUI (page 2)
41309401TH Rev.4
209 /