Oki OKIFAX4550 Maintenance Manual page 119

Table 2.8 (6/6) User's Initial Settings (Function Program)
P.F.
Item
No.
31 Speech Receive
32 USB Conv. Mode (USB: Universal
Serial Bus)
33 Paper Size Check
34 Print Job T.O.
41309401TH Rev.4
Specifications
Determine whether the incoming call is answered
when the information transmission capacity
instracted by the network is voice transmission.
1) Setting values
ON(Answered)/OFF(Not answered)
• This setting cannot be made when G4 op-
tion board is not provided.
This function is available for OKIOFFICE87. Sets
to use or not the Centro I/F in USB Conv. Mode
(unidirectional printer mode).
1) Setting values
ON(USB conv. mode)/OFF(MFPI mode)
Sets to check or not the recording paper size
specified by the command that set by the terminal
for PC printing in USB Conv. Mode.
1) Setting values
ON(Checked)/OFF(Not checked)
• The operation of the machine when paper
size differs is as follows:
ON: Paper request appers just before printing
and recording paper size jam is verified
after activation of printing.
OFF: Paper request does not appers just before
printing and recording paper size jam is
verified after activation of printing.
Note: Setting is disabled when USB Conv. Mode
is OFF.
Sets to interrupt printing when job-end command
cannot be detected within the set time to stote the
data received from Centro I/F in print buffer for PC
printing in USB Conv. Mode.
1) Setting values
5SEC/30SEC/5MIN
Note: Setting is disabled when USB Conv.
Mode is OFF.
Default
119 /